Do you know that feeling? You come indoors on a brisk, windy day, hoping to find some relief from the cold. A few hours later, you realize you must wrap yourself in blankets and wear a sweater. After adjusting the heater a second time, you notice that cold air has seeped through the windows, making your room freezing! This can be pretty frustrating, especially since your heating bill is now twice as high as it should be. The good news is that with a bit of window draft prevention, you can solve this problem. A few simple changes to your windows can help you feel comfortable throughout the year. Let’s explore five effective ways to prevent the cold from seeping through your old windows.
5 Reasons Why the Cold Comes in Through Your Windows
Temperature can make or break your home’s comfort. If it’s too cold, you’ll start to feel it in your fingers and toes. But if it’s too hot, you’ll start to sweat and feel sticky and uncomfortable.
So how can you make sure that your windows keep the temperature comfortable instead of making things worse? Here are the most common reasons why the cold comes in through your windows:
1. Your windows are old.
One of the most common reasons for drafty windows is that they’ve broken down with age. Older windows are more susceptible to cracks and holes, and the seal around the window might not be as tight as it used to be.
If your windows are more than 20 years old, it’s probably time to consider replacing them. New windows will not only be more energy-efficient but also look nicer and add value to your home.
2. There are cracks or holes in your windows.
The presence of cracks or holes in your windows will make it possible for cold air to enter your home and make you uncomfortable. You need to inspect your windows to ensure there are no visible cracks.
A good test to check for cracks or holes is to hold a piece of paper up to your window. If the paper moves, your windows are not keeping cold air out. If you find cracks or holes, you can seal them with some silicone caulk. This is a quick and easy fix that can make a big difference.
3. The seal around your window is broken.
You should also check your window frames for any damage. If they are rotting or warped, keeping the cold out will be more challenging. In this case, you might need to replace the windows altogether.
Window seals can also wear down over time, allowing cold air to seep in. You can test for broken seals by lighting a candle near your window. If the flame flickers, there’s most likely a draft coming in somewhere. Re-caulking or re-sealing your windows is a relatively easy fix and can make a big difference in how comfortable you are in your home.
4. Your windows aren’t insulated.
Another reason you might feel a draft coming in from your windows is that they aren’t insulated. If you live in an older home, your windows are likely not as energy-efficient as they could be. It could also be that the installation company didn’t install the windows properly when the contractors first built your home.
Insulated windows are essential in keeping the temperature comfortable in your home. One way to check if your windows are insulated is to hold your hand to the glass. If you feel a cold breeze, it’s time to add some insulation. There are many different ways to insulate your windows, so do some research to find the best option for you and your home.
5. You have single-pane windows.
If your windows are single-pane, you will probably feel a lot of drafts coming in. Single-pane windows are less energy-efficient because they don’t have the same insulating properties as double or triple-pane windows.
An easy way to tell if you have single-pane windows is to look at them from the outside. If you can see only one pane of glass, then that’s what you have. The best way to improve your home’s energy efficiency is to upgrade to at least double-pane windows.
5 Ways to Stop Window Drafts & Feel Comfortable in Your Home Again
If you’re feeling a draft coming in from your windows, there are a few things you can do to prevent cold air from coming in and make your home more comfortable.
1. Use weather stripping to seal the cracks around your windows.
If your window frame has cracks or holes, you can use weatherstripping to fix drafty windows. Weatherstripping is a cheap and easy way to improve the insulation of your windows. It also comes in different types, including V strips or tubular rubber, vinyl, or silicone weather stripping. Picking and installing the right one for your windows should solve your draft problem.
2. Replace the caulk.
Caulk is a sealant that helps to fill gaps around your windows. However, over time, the caulk can become old and cracked, allowing cold air to seep in. Therefore, you should check the caulk around your windows at least once a year and replace it if necessary.
Caulking is a relatively easy DIY project that anyone can do. Just scrape off any old caulk or peeling paint around the exterior perimeter of the window. Then, a fresh layer of caulk is applied to the edges.
3. Apply plastic window wrapping or glass film.
If you’re not interested in replacing your windows, or if they are in good condition, you can install window insulation film. This plastic wrapping or glass film goes over your windows. It prevents the cold air from coming in. Window insulation film is an easy way to improve your home’s energy efficiency without having to replace your windows.
You can buy window insulation film at most hardware stores or online. All you have to do is measure your windows and order the right size. It’s a quick and easy installation, and most films come with a warranty.
4. Use thermal curtains and draft snakes.
The use of thermal curtains and draft snakes can stop cold air from reaching the inside of your home. Thermal curtains are made of thicker fabric that helps to keep warm air in and cold air out. A draft snake is a long, tube-shaped object that you place in front of your doors or windows to block drafts.
You can buy thermal curtains and draft snakes at most home goods stores or online. They are relatively inexpensive and easy to use. As an alternative, you can also hang insulated curtains.
The Best Way to Prevent Window Drafts Before They Happen: Marvin Essential Windows
Your windows are meant to allow light to enter, not the elements. With Marvin windows, you can be sure you are getting the best value from your windows all year round. Since 1912, Marvin has provided windows that are as functional as they are beautiful. The family-owned business provides windows crafted with exceptional skill, which is why they’re one of our preferred window brands.
An excellent Marvin product to choose when comfort and style are your top priorities is Marvin’s Essential Collection Windows. These windows have clean lines, versatile looks to fit the style of any home, and are virtually maintenance-free. They also use strong, durable fiberglass, so you don’t have to worry about the weather following you indoors. If you want new windows to eliminate drafts and indoor chill, reach out to Windura. Whether you’re interested in Marvin’s Essential Collection or unsure what fits your needs, we’re here to help. We’ve served the Kansas City area for over 20 years and offer free consultations to help you find the best solution for your home and your family. Schedule your free in-home consultation today to get started.
